• <input id="gc08k"><s id="gc08k"></s></input>
  • <blockquote id="gc08k"><samp id="gc08k"></samp></blockquote>
  • Key: Blow Molding Machine,Plastic Bottle Blowing Machine,Plastic Blowing Machine,Blow Moulding Machine

    Blow Molding Machine Total:1 products
    Blow Molding Machine CPX

    YSXZB Series automatic rotary preformed cup filling and sealing machine is applicable to pack the products like yogurt ,milk,mineral water, beverage , ice cream, seasoning and so on.The process is from cup separating, sup falling,quantitive filling, suck cap film,sealing,and product conveying.The choice of the machine model and number of filling heads depends on the factors like required output, size and type of packaging and requirements for additional equipment.

    The machine can provide a lot of solutions for the below field:suitable for both traditional and innovative packaging designs, quick change-over to alternative packaging, different ways of container closing.

    Applicable Filling material:Liquid:yogurt ,milk,mineral water, beverage , ice cream, seasoning and so on Cap film material:Al+plastic laminated film;paper+plastic laminated film. Pre-cut lid or film roll. Preformed cup type: Paper cup,Plastic cup,Alu.cup etc.

    Main Technical Data:

    Function

    name

    Brand Brand country Function name Brand Brand country

    Main

    motor

    SEW German Operation center

    SIEM

    ENS

    German

    High

    pressure combination valve

    Eugen Seitz Switzerland Low voltage electrical appliance

    Schneider

    / SIEM

    ENS

    France
    /German

    Stretch

    cylinder

    Rexroth German

    Infrared heating

    tube

    PHILIPS Netherlands

    Linear

    Guides

    Rexroth German Infrared thermometer OPTEX Japan

    Gas

    source

    filter

    FESTO German Encoder SICK German

    Torque

    clutch

    MAYR German

    Limit

    switch

    OMRON Japan

    Low

    pressure control solenoid

    valve

    MAC USA Photoelectric switch SICK German
    Frequency converter Schneider France Proximity switch SICK German
    PLC SIEMENS German Intermediate relay OMRON Japan

    Program

    mable Controllers

    SIEMENS German      

     

     

    Main?parameter:

    PRODUCTION DATA Mould
    cavities
    N 16
    Max.?body?
    diameter
    mm 75
    Max.?Height mm 260
    M.?diameter mm 38
    Max.?preform
    Height
    mm 140
    Max.?capacity ml 750
    Nominal output
    for 500ml,
    bottle(*)
    pcs/h 32000
    DIMENSIO NS Host Length *Width)*
    Height
    mm 3800X2400X3200
    Weight kg 21000
    Heating furnace Length)?*Width)*
    Height
    mm 5800X1400X2200
    Weight kg 2500
    ELECTRICAL
    FEEDING
    Voltage V 380
    Frequency Hz 50
    Total?power
    installed
    kW 260
    Main?motor
    power?installed
    kW < 5.5 <
    Medium?power
    absorbed(**)
    kW 80-100

    COOLING
    /HEATING SYSTEM
    BASE MOULD Water?inlet
    10~20
    Water?inlet
    pressure
    bar 5
    Flow m3/h 10
    BODY MOULD Water?inlet
    temperature(**)
    10~20
    water?inlet
    pressure
    bar 5
    Flow m3/h 18
    Heating furnace
    But water
    Cooling water temperature(**) pressure 10~20
    Water?inlet pressure bar 5
    Flow m3/h 8
    SERVICE?AIR Nominal?
    pressure
    bar High pressure to low pressure
    Air?rate?(**) m3/min
    Filtering
    grade?(filter)
    micron
    Humidity
    BLOW?AIR

    Nominal
    pressure
    bar 40
    Air?rate?(**) m3/min 20
    Filtering?
    grade(filter)
    micron 0.01μ
    Maximum
    pressure
    dew point
    +3℃
    Oil Maximum concentration 0.01?mg/?m3
    HEATING Heating
    groups?*?pcs
    n 16*6
    ENVIRONMENT Environment?
    temperature?(**)
    (20℃-35℃)±3℃
    Environment?
    humidity?(
    without?
    condensate)
    % ≤70%
    Max.
    altitude
    (over?sea)
    m
    CONNECTIONS Connection
    service?air
    Inch. 1
    Connection
    blow air
    Inch. 2
    Connection
    water and oil
    Inch. 2

     

    Main technique:

    1) Hopper and feeding mechanism: computer monitoring, no need for assistance; according to different types of preforms, the output speed can be adjusted arbitrarily

    2) Heating furnace: When heating, the preform rotates while moving forward in the furnace to make the wall of the preform heat evenly; specially designed rapid hair cooling device; specially designed defective preform detection and ejection device

    3) Blowing part: full monitoring by the host computer during the entire blowing production process

    4) Special formwork system: The mold base is equipped with a pressure balance device to minimize the mold clamping line of the bottle during the molding of the bottle, ensuring the quality and performance of the bottle.

    5) Stretching secondary blowing system: secondary blowing system, pre-blowing, high-pressure forming blowing, secondary blowing pressure, time adjustable .

    6) Manipulator device: Made of stainless steel, precision machining; rotary manipulator with torsion overload protection to prevent equipment damage when equipment is not damaged

    7) Safe and reliable mechanical transmission: using variable frequency motor, gearbox and inverter of SEW Company of Germanyod grade requirements.

    8) Mold: audited by professional designers

    Description: 1. Actual production depends on preform shape, preform wall thickness, bottle design and section quality
      2. Change according to different generation conditions, pressure and other factors
      3. The above water, electricity and gas parameters are calculated on the basis of 500ml water bottle.

     

    Inquiry this product
    Quick Links: Packing Machine  Case Erectors  Labeling Machine  Shrink Wrapper  Carton Sealer  Strapping Machine  Strapping Tool  Palletizer  Wrapping Machine  Carton Packer  Packing line  PP Straps  LLDPE Stretch Film Conveyor   Filling and Capping Machine   Vacuum Packaging Machine  Robot  Vertical Packaging Machine
    幸福彩票官网平台